Inoksan FBE042 KONVEKSİYONLU FIRIN Sanayi Tipi Fırın
cooking, it is engaged or disengaged through this
button. When the fan is engaged, the led on the
left upper corner is illuminated.
Fan Speed Adjustment Button: For the selected time mode, the
It ensures 6 step adjustment of the fan function duration in minutes of the cooking is adjusted on
cycle. 1 step is 400 rpm., 2 is 600, 3 is 800, 4 is the time section. Should this time mode be not to
1000, 5 is 1200 and 6 is 1400 rpm. When be used, the time value is entered as " 00 ". In
engaged, it starts from the 6th step (1400 rpm.). such a case, the machine goes to the next mode
When pressed, it goes to the 1st step. At each without having processed this mode.
press, the step is increased by 1. 4-Temperature Adjustment:
Speed Adjustment Indicator: It displays the
actual speed step of the fan. It is independent of
the fan function and indicates the cycle of
function. The cooking temperature is
NOTE : The fan speed adjustment is independent also adjusted to the required value through the
from the programs. The programs should be temperature buttons.
readjusted before these are operated. 5-Combiner Rate:
3.2 - Operation of the Machine
• Connect the water inlet valve and the electric
switch feeding the machine
• Pressing the ON/OFF button during approx. 1 The cooking operation can be
second, ensure that the machine is energized. selected on a certain rate on dry (with convection)
• The machine has 10 programs. For each program, boiling (with steam) or both basis. The red rates
temperature, time and cooking types can be on the indicator indicate the dry (with convection)
determined in three different modes (t1, t2, t3). cooking rates and the blue rates indicate the
Cooking programs can be arranged as per the list boiling (with steam) cooking rates. The record is
on Table 1. made in the determined program number when it
is returned again to the 2nd section and the steps
3.2.1 - Programming no. 3, 4 and 5 are performed for t2 and t3 time
1-Program Selection modes. When another program is desired to be
realized, it is returned to the 1. step and other
steps are repeated having chosen the new program
number.
Beside the manual program, 6-Fan Speed Adjustment:
there are 10 programs through which temperature,
time and combiner rates can be entered for three
different modes. Once the parameters are entered,
the automatically stored values are loaded when This feature is independent
the program is called. The program number where from the programs. It should be adjusted
the parameters (temperature, time, combiner rate) manually. It is not memorized. It determines the
of the product required to be registered for the cycle of the fan, when this is engaged.
cooking operation are to be stored, is selected
with the help of the increase and decrease buttons 3.2.2 - Control of the program parameters
on the program section. If a previous record is and Operation
kept, such values appear on the related indicators. 1-The program is selected:
2-Time Mode Adjustment: Through the increase and decrease buttons, the
program is chosen the parameters of which are to
"t1" mode is selected from be controlled (manual program included). In such
among the time modes. Now, the time, a case, the temperature, time, time mode and
temperature and combiner rates can be entered for combiner rates appear on the related displays and
this mode. starts to flash. The time mode is on " t1 ".
3-Time Adjustment:
2-Temperature Set Values:
The set temperature value is read on the
temperature indicator.
3-Time Set Value:
13
