Arçelik 9460 FCS Bulaşık Makinası
Operating the product The machine will remain silent in pause mode for some time in order to remove the water in the machine and on the dishes completely and to have the water softener cleaned, and then it will resume running in d in mode. Cancelling the programme Press and hold the Programme Selection / Programme Cancel keys for 3 seconds. Release the key as the Start indicator starts flashing. Once you close the door of your machine, draining is completed in 2 minutes and the machine gives an audible warning when it is completed. There might be residues I of detergent or rinse aid in the machine and/or on the pieces being washed depending on the step the programme you have cancelled was in. Salt indicator (S) Please check the salt indicator on the display to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever salt indicator appears on the display of your machine. Adjusting the water hardness I level is explained in Water Softenin S stem section. 42/51 EN Rinse Aid indicator (96) Please check the rinse aid indicator on the display to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid indicator appears on the display of your machine. End of programme When the programme you I have selected comes to an end, an audible warning signal will warn you to turn off your machine. This audible signal will warn you with certain intervals before it turns off. End of Programme indicator will light up when the washing programme is over. 1. 2. 3. 4. Open the door of the machine. Press On/Off key to turn off your machine. Close the tap. Unplug the machine from the socket. For energy saving, the I machine is automatically turned off following the completion of the programme or if the ro ramme is not started. Dishwasher / User's Manual