Arçelik 9460 FCS Bulaşık Makinası
Preparation Adjusting the water softening system Cleaning, rinsing and drying performance of your dishwasher will increase when water softening system is adjusted properly. Adjust the new water hardness level according to the Water hardness level instruction in this booklet. Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. Remove the test strip from the packet. 1 Second Tum on the tap and Hold the test strip in Remove the test let the water run for the water for about strip from the water about a minute. a second. and shake it. 1 Minute Wait for 1 minute. The test strip shows u the hardness leovel After determining hardness level of the supply water: 1 . Switch on the machine and press the Time Delay and P keys simultaneously. Hold the keys pressed until entering the Settings menu. Rinse Aid and Salt indicators (model dependant) will flash on the display. 2. Select the salt indicator with the program key. Current regeneration level is displayed on the display. 3. Using Time Delay key, adjust water hardness level according to the hardness of the supply water. For correct setting please see "Water hardness level adjustment table" 4. Press On / Off key to save the setting Water hardness level adjustment table Hardness English Water German Water French Water Level 1st Level 2nd Level 3rd Level 4th Level 5th Level 14/51 EN Water Hardness Level Indicator Hardness OdE Hardness 0 dB Hardness OdF 0-5 6-9 10-15 16-19 20-24 25$2 0-4 5-7 8-12 13-15 16-19 20-50 0-8 9-13 14-22 23-27 28-34 35-90 Press the Time Delay key to SWItch the water hardness level to position Pl. Press the Time Delay key to switch the water hardness level to position P2. Press the Time Delay key to switch the water hardness evel to position P3. Press the Time Delay key to switch the water hardness evel to position Press the Tlme Delay key to switch the water hardness evel to position P5. Dishwasher / User's Manual