Arçelik 9460 FCS Bulaşık Makinası
Preparation Perform the same hardness level adjustment that you have set on the control panel also with the regeneration adjustment switch. For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration adjustment switch to 3rd level. Regeneration Adjustment Switch 0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level 1 2 5 2 3 4 3 -2 4 If the hardness level of the supply water is above 90 OdF or if you are using well water, then it is recommended to use water purification devices and special filters. If the hardness level of the supply water is below 130dF, there is no need to use salt in your dishwasher. If this is the case, "No Salt Warning Indicator" (if any) illuminates continuously on the panel of your machine. If the water hardness level adjustment is set to level I, the "No salt warning indicator" will illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the Salt indicator will not illuminate. If you move your house, i it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level. Dishwasher / User's Manual 15/51 EN