Arçelik 9460 FCS Bulaşık Makinası
Preparation 3. 4. After the empty washing cycle, review the user manual and readjust the water hardness level so as to suit the water supply. Make the appropriate rinse aid settings. Depending on the model, i salt indicator and/or rinse aid indicator should be enabled again if they are disabled before. Rinse aid i The rinse aid used in dishwashers is a special combination that aims to increase drying efficiency and prevent water or lime stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only. 2. 3. 4. Please check the rinse aid indicator on the display to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid warning indicator appears on the display of your machine. 1. Open the lid of the rinse aid reservoir by pulling the latch in the direction of the arrow (B). 18/51 EN Fill the reservoir until "MAX" level. Turn the rinse aid amount adjuster manually to a position between 1 and 6 (C). If there are stains on tableware items after washing, level must be increased and if there is a blue trace after wiping them by hand, it must be decreased. This is set to position 4 as factory default. c Close the lid of the reservoir by pressing on it lightly. After making sure that the lid is closed, wipe clean any spilled rinse aid outside the reservoir. Rinse aid that spilled accidentally will cause foaming and it will eventually decrease washing erformance. Dishwasher / User's Manual