Arçelik 9460 FCS Bulaşık Makinası
Installation Connecting water supply We recommend attaching i a filter on the house/ apartment supply water inlet to protect the machine from damages that may arise from impurities (sand, dirt, rust, etc.) coming from the urban water supply system or from your own water system as well as to prevent complaints such as yellowing or sludge accumulation at the end of washin Permitted water temperature: up to 250C The dishwasher may not be connected to open warm water devices or flow- through water heaters. Do not use old or used water inlet hose on the new product. Use the new water inlet hose supplied with the product. Connect the water inlet hose directly to the water tap. Pressure coming from the tap should be minimum 0.3 and maximum 10 bars. If the water pressure exceeds 10 bars, a pressure relief valve should be installed in between. Open the taps completely after making the connections to check for water leaks. 10/51 EN Use a screw-on hose connector to connect the water inlet hose to a water tap with a % inch external thread If required, use a filter insert to filter deposits from the ipes. 112" a-kin 10 Tightly fix the water discharge hose to the drainpipe in order to prevent any dislocation of the water discharge hose during operation of the product. Dishwasher / User's Manual