Beko AFDF 35400 IOKS Fırın
4. Remove the front door by pulling it upwards to release it from the ri ht and left hin es. teps carried out during removing process i hould be performed in reverse order to install e door. Do not forget to close the clips at th hinge housing when reinstalling the door. Removing the door inner glass The inner glass panel of the oven door can be re- moved for cleaning, Open the oven door. 2 2 Frame Plastic part Pull towards yourself and remove the plastic part installed to upper section of the front door. 2 3 The first step to regroup the door is reinstalling inner glass panel (2). As illustrated in figure, place the chamfered corner of the glass panel so that it will rest in the chamfered corner of the plastic slot. Inner glass panel (2) must be installed into the plastic slot close the innermost glass panel (1). When installing the innermost glass panel (1), make sure that the printed side of the panel faces towards the inner glass panel. It is important to seat lower corner of inner glass panel into the lower plastic slot. Push the plastic part towards the frame until you hear a "click". Replacin the oven lam 2 3 4 4123 Innermost glass panel Inner glass panel Outer glass panel Plastic glass panel slat-Lower i As illustrated in figure, raise the innermost glass panel (1) slightly in direction A and pull it out in direction B Repeat the same procedure to remove the inner glass panel (2). DANGER: Before replacing the oven lamp, make sure hat the product is disconnected from mains and cooled down in order to avoid the risk of an electrical shock. Hot surfaces may cause burns! he oven lamp is a special electric light bulb hat can resist up to 300 cc. See Technical specifications, page 11 for details. Oven lamps can be obtained from Authorised Service Agents or technician with licence. 31 /EN