Beko AFDF 35400 IOKS Fırın
Maintenance and care General information Service life of the product will extend and the ity of problems will decrease if the product is cleaned atre ular inm'als. Cleaning the oven To clean the side wall Remove pin (I) of the side rack by pulling it in the direction of arrow with the side wall it is mounted • • DANGER: Disconnect the product from mains supply efore starting maintenance and cleaning works. There is the risk of electric shock! DANGER: Allow the product to cool down before you lean it. Hot surfaces may cause burns! Clean the product thoroughly after each use. In this way it will be possible to remove cooking residues more easily, thus avoiding these from buming the next time the appliance is used. No special Cleaning agents are required for cleaning the product. Use warm water with washing liquid, a soft cloth or sponge to clean the product and wipe it with a dry cloth. Always ensure any excess liquid is thoroughly wiped off after cleaning and any spillage is im- mediately wiped dry. Do not use cleaning agents that contain acid or chloride to clean the stainless or inox surfaces and the handle. Use a soft cloth with a liquid de- tergent (not abrasive) to wipe those parts clean, 2. 3. 4. 5. 6. 7. Remove the side rack and side wall completely by pulling it towards you. Remove the side rack from the holes (2) on the oven wall by pulling. To clean the side rack and side wall, use warm water with washing liquid, a soft cloth or sponge to clean the product and wipe it with a dry cloth. Place side rack by pulling to hdes (2) on the back of side wall. 2 i i in attention toswee in one direction. he surface might get damaged by some etergents or cleaning materials. o not use aggressive detergents, cleaning powders/creams or any sharp objects during cleaning. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shatter'ng of the g ass. o not use steam cleaners to clean the ppliance as this may cause an electric shock. i you have the flexi telescopic feature of our product; there is one hole on the ack surf side wall. Place side rack by Cleaning the control panel Clean the control panel and knobs with a damp cloth and wi e them d o not remove the control buttons/knobs to i lean the control panel. ontrol panel may get damaged! pulling to hole. Lock side rack to side wall by pulling pin (I) of side rack in the direction of arrow. Place side rack and side wall assembly to its place by pulling pins (3) to holes on the back wall as shown in figure. 29/EN