prove the cooking result. More homogenous
cooking is obtained in large volume foods which
are rising as the hot air comes frcm the side
walls as well, which is a function not contained
in conventional ovens.
Time and energy can be saved and perfect
cooking results can be obtained thanks to the
multi-tray cooking feature of this function.
How too erate the rill
WARNING
Close oven door during grilling.
ot surfaces may cause burns!
Switching on the grill
Turnspit function
When grill function is selected, turnspit motor will start
turnin
he turnspit motor works with the grill func-
i
on. Once the grill function is operated, the
2,
3.
4
5.
6.
First operating function appears on display after
touching (D button to open the oven.
Touch to select the desired grill function.
If you desire to change the temperature that is
recommended for operating function, enable the
temperature field by touching button,
symbol flashes.
Set the desired temperature touching A/S/
Confirm the temperature setting by touching
key.
Touch Il key to start grilling if temperature and
operating function are appropriate. symbol ap-
pears on display.
» Your oven will readily start operating in the selected
function and will increase the inner temperature to the
set temperature. Each grades of the inner temperature
symbol will be lit as inner temperature reaches to the
set temperature. Additional active heaters and recom-
mended tray position appear in the Function display.
Il button
7. You can finish grilling by touching
once again.
» The oven finishes grilling and symbol appears on
display.
Switching off the grill
1, Touch the O button for approx. 2 seconds to
close the oven.
Foods that are not suitable for grilling
carry the risk of fire. Only grill food
which is suitable for intensive grilling
heat.
Do not place the food too far in the
back of the grill, This is the hottest
area and fa food ma catch fire.
•
•
2
3
rill heater cuts in and out intermittently.
Therefore, while the grill heater is enabled,
the turnspit motor runs and when it is dis-
abled the turnspit motor stops likewise. This is
nota fau t.
After selecting the Grill function, skewer the
meat or chicken onto the spit by means of the
fork (3).
Insert the turnspit into its slot in the rotation
motor located at the rear wall of the oven.
Place the turnspit onto the spit frame,
Place the frame to the relevant rack of the oven.
Place a tray to one of the lower racks in order to
collect the fats. Put some water into the tray for
ease of cleaning.
Do not forget to remove the plastic handle of
the turnspit. Waries depending on the product
model.)
When cooking completes, attach the plastic
handle and remove your food from the oven.
(Varies depending on the product model I)
ir;i;;
2
3
Turnspit frame
Plastic handle •
Fork
Varies depending on the product model.
25/EN