Inoksan FBE 010 KONVEKSİYONLU FIRIN Sanayi Tipi Fırın

realized, it is returned to the 1. step and other   flashing for some time, it starts to show the actual 

steps are repeated having chosen the new program    (measured on that point) values. Time starts to 
number.                                             count when the temperature reaches the adjusted 
6-Fan Speed Adjustment:                             (set) value. The set time value decreases by one at 
                                                    the end of each minute. If the oven door is opened 
                                                    when the time counts down, the machine emits 

                                                    continuous warning signal and the time count 
                                                    stops. When the door is closed, the warning stops 
                   This feature is independent      and time continues to count down from where it 
from the programs. It should be adjusted            has remained. When the time is reset, interrupted 
manually. It is not memorized. It determines the    warning is emitted and the heaters and fan are 
cycle of the fan, when this is engaged.             stopped and the stop position is taken. If it is 
3.2.2 - Control of the program parameters           meant to stop working before the end of time, 
and Operation                                       START/STOP button is pressed again.

1-The program is selected:                          PROGRAMMED START:
Through the increase and decrease buttons, the      The program number, the temperature, time, time 
program is chosen the parameters of which are to    mode and combiner rates of which have been 
be controlled (manual program included). In such    previously entered, is selected through the 
a case, the temperature, time, time mode and        program increase and decrease button. The 

combiner rates appear on the related displays and   adjusted values appear on the related indicators. 
starts to flash. The time mode is on " t1 ".        After flashing for some time, it starts to show the 
2-Temperature Set Values:                           actual (measured on that point) values. When the 
The set temperature value is read on the            start/stop button is pressed, the temperature, time 
temperature indicator.                              and combiner rate entered for the "t1" is loaded 
3-Time Set Value:                                   from the memory and the oven starts to function. 
The set time value is read on the time indicator.   When the temperature reaches the adjusted (set) 
4-Combiner Rate:                                    value, the time starts to count. The displayed time 
The set combiner value is read on the combiner      value decreases by one at the end of each minute. 
rate indicator. The time mode button is pressed for When the time is reset, the machine loads the set 
the other " t2 " and " t3 " modes. The operations   value (as well as the temperature set value and 
no. 2, 3 and 4 are repeated for each time mode. 5   combiner rate) entered for the " t2" mode and 
seconds after the last pressed button, the machine  continues to work according to these new values. 
gets    off    the     adjustment    position.      Once the "t2" and "t3" modes are processed, the 
5-Fan Speed Adjustment:                             machine emits a sound warning and stops 
The fan speed adjustment is done after having       working. The time mode returns to "t1" in this 
appeared all the adjusted values. The fan speed     case.
adjustment is independent from the program. The     DRY COOKING:
speed adjustment should be done before each         Before giving the start, 100% convection (0% 
operation according to the type of the product to   steam) rate is selected through the combiner 
be cooked.                                          selection button. In this case only the heaters are 
6-Operation:                                        engaged. The fan starts to function automatically. 
The start button is pressed. The oven starts to     The fan can not be stopped when the heaters are 
function as per the adjusted values.                engaged. However, the speed adjustment can be 
7-Control During Operation:                         changed. The time starts to count when the 
Once the oven starts, the set values can not be     temperature reaches the adjusted (set) value. The 
changed. However, these can be seen for control     set time value decreases by one at the end of each 
purposes. The set time can be verified by pressing  minute. If the oven door is opened when the time 
on the time set button. The set temperature can be  counts down, the machine emits a continuous 
seen by pressing on the temperature set button.     warning sound and the time count is stopped. The 

                                                    warning stops when the door is closed and the 
3.2.3 - Operating Principles                        time continues to count from where it has 
MANUAL START:                                       remained. If it is desired to feed steam to the oven 
After having entered the temperature, time and      during the cooking operation, " Manual Steam 
combiner rates, the oven starts to function by      Button " is pressed. As long as it is kept pressed, 
pressing on the start/stop button. In such a case,  steam is fed into the oven. When the time is reset, 
the time mode is not operative. The adjusted        a sound warning is emitted, the heaters and fan are 
values appear on the related indicators. After      stopped and the stop position is taken. If it is


                                               13