Nissan JUKE F15 Binek Otomobil
0.9. Name and address of the manufacturer's representative (if any):
NISSAN TECHNICAL CENTRE EUROPE
Trading division of Nissan Motor Manufacturing (UK) Limited
Cranfield Technology Park
Moulsoe Road
Cranfield
Bedfordshire
MK43 ODB
United Kingdom
SECTION Il
The undersigned hereby certifies the accuracy of the manufacturer's description in the attached
information document of the vehicle(s) described above ((a) sample(s) having been selected by the EC
type-approval authority and submitted by the manufacturer as prototype(s) of the vehicIe type) and that
the attached test results are applicable to the vehicle type.
1. For complete and completed vehicles / variants (I):
The vehicle type meets the technical requirements of all the relevant regulatory acts as
prescribed in Annex IV to Directive 2007/46/EC.
2. For incomplete vehicles / variants 1): Not applicable
3. The approval is granted
4. The approval is granted in accordance with Article 20 and the validity of the approval is thus
limited to dd/mm/yy. Not applicable
Place: BRISTOL
Signature: A.W. STENNING
Head of Technical and Quality Group
Date: 16 AUGUST 2010
Attachments: Information package.
Test results (see Annex VIII)
Name(s) and specimen(s) of the signature(s) of the person(s) aulhorised to sign
certificates of conformity and a statement of their position in the company.
NB: If this model is used for type-approval pursuant to Articles 20, 22 or 23, it may not bear the heading,
"EC Vehicle Type-Approval Certificate" except:
- in the case mentioned in Article 20 where the Commission has decided to allow a Member State to
grant type-approval in accordance with this Directive.
• In the case of vehicles of the category M1, type-approved according to the procedure p
article 22.
EWK207243 An executive agency of the Deparlment for Transport
July 2010 version 2