Electrolux ESI5510LAX Bulaşık Makinesi
9 1) Programme Water 13-14 9 4 Energy (kWh) 0.7 -0.9 0.8 0.1 ENGLISH Duration (min) 70 - 80 30 1) The pressure and the temperature of the water, the variations of the mains supply, the op- tions and the quantity of dishes can change the va ues. 5.2 Information for test institutes For all the necessary information for test performance, send an email to: info.test@dishwasher-production.com 6. SETTINGS 6.1 Programme selection mode and user mode When the app iance is in programme selection mode it is possible to set a programme and to enter the user mode. In user mode, the following settings can be changed: • The leve of the water softener according to the water hardness. The activation or the deactivation of the acoustic signal for end of programme. The activation or deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid. These settings will be saved until you change them again. How to set the programme selection mode The appliance is in programme selection mode when the programme indicator ECO is on and the display shows the programme duration. Write down the product number (PNC) that •s on the rating plate. When you activate the appliance, usually it is in programme selection mode. However, if this does not happen, you can set the programme selection mode in the following way: Press and hold simultaneously Program and Option until the appliance is in programme selection mode. 6.2 The water softener The water softener removes m•nerals from the water supply, which would have a detr•mental effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water 'n your area. Your local water authority can advise you on the hardness of the water in your area. It 's important to set the right level of the water softener to assure good washing results.