Electrolux ESI5510LAX Bulaşık Makinesi
20 www.electrolux.com Problem and alarm code Ratt ing/knocklng sounds from inside the appliance. The appliance tips the cir- cuit-beaker. Possible cause and solution • The tableware IS not properly arranged in the baskets. Refer to basket loading leaflet. • Make sure that the spray arms can rotate free y. The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capac ty of the meter or turn off one of the ap- pliances in use. • Internal eectrica fault of the appl'ance. Contact an Au thorised Service Centre. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. Once you have checked the apprance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Sen,'ice Centre. For a arm codes not described in the table, contact an Authorised Service Centre. 12.1 The washing and drying results are not satisfactory Problem Poor washing results. Poor drying results. ihere are whitish streaks or bluish layers on glasses and dishes. There are stains and dry wa- ter drops on glasses and dishes. The dishes are wet. Possible cause and solution • • • • • • • • • • Refer to "Daily use", "Hints and tips" and basket loading leaflet. Use more intensive wash'ng programmes. If you use multi-tablets, always switch on the option Multitab. Tableware has been left for too long nside a closed appliance. There is no rinse aid or the dosage of rinse a'd is not enough. Set the fnse aid dispenser to a higher evel P astic items may need to be towel dried. We recommend to always use rinse aid, even in combination with multi-tablets. The re ease quantity of rinse aid is too much. Adjust the rinse ad level to a lower level. The quant ty of detergent s too much. The re eased quantity of rinse aid is not sufficient. Adjust the r nse aid eve to a higher eve. The quality of the r'nse aid can be the cause. The programme does not have a drying phase or has a dry ng phase with low temperature. The rinse aid dispenser IS empty. The quality of the r nse aid can be the cause. The quality of the mult• tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse a d and mult -tablets together.