Nissan TIIDA C11 Binek Otomobil
0.8. Name(s) and address(es) of assembly plant(s): Nissan Mexicana, S.A. de C.V. Nissan Mexicana, S.A. de C.V. Carretera Logos de Moreno Km. 75 Paseo Cuauhnahuac Km 4.5 Aguascalientes Ags Jiutepec Morelos Mexico C.P. 20290 Mexico C.P. 62500 The undersigned hereby certifies the accuracy of the manufacturer's description in the attached information document of the vehicle(s) described above ((a) sample(s) having been selected by the EC type-approval authority and submitted by the manufacturer as prototype(s) of the vehicle type) and that the attached test results are applicable to the vehicle type. 1. For complete and completed vehicles/variants (1): The vehicle type meets (1) the technical requirements of all the relevant separate Directives as prescribed in Annex IV and Annex XI (1) (4) to Directive 1970/156/EEC. 2. For incomplete vehicles/variants (1): Not applicable The vehicle type meets/does not meet (1) the technical requirements of the separate Directives listed in the table on side 2. 3. The approval is granted (1) 4. The approval is granted in accordance with Article 8(2)(c) and the validity of the approval is thus limited to dd/mm/yy. Not applicable Place: BR1STOL Signature: A.W. STENNING Head of Technical 8, Quality Group Date: 31 JANUARY 2008 Attachments: Infornnation package. Test results Annex VIII). Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company. NB: If this model is used for type-approval pursuant to Article 8(2), it may not bear the heading, "EC vehicle type-approval certificate" except in the case referred to in paragraph 2(c) where the Commission has approved the report. EWH185810 An executive agency of the Department for Transport