Kärcher K7 Full Controll Yüksek Basınçlı Yıkama Makinesi
Scope of delivery
The scope of delivery of the device is illustrated on the
packaging. Check the content for completeness upon
unpacking
In the event of missing accessories or any transport da-
mage, please contact your dealer.
Additionally required
Fabric-reinforced water hose with commercially
available coupling
Minimum diameter, 1/2 inches (13 mm).
Minimum length 7.5 m,
Description of the Appliance
These operating instructions describe the maximum
equipment. Depending on the model, there are differen-
ces in the scopes of delivery (see packaging).
See fold-out page 4 for illustrations
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1
Coupling element for water connection
Water connection with integrated sieve
High pressure hose
Hose guide
Storage for spray lances
Storage / parking position for trigger gun
Connection for Plug Clean detergent
Carrying handle
Transport handle, detachable
Hose switch
High pressure connection
Appliance switch "O/OFF'/ „I/ON"
Mains cable with mains plug
Accessory compartment
Hooks for fastening the net
Net for accessory compartment
Bearing wheel
Base with carrying handle
Full Control trigger gun
Battery compartment
LED pressure indicator
MIX/ 1 - SOFT 2 - MEDIUM / 3 - HARD
Battery compartment lock
Lock trigger gun
Button for detaching the high-pressure hose from
the trigger gun
Full Control spray lance Vario Power
Carrying out the most common cleaning tasks
Pressure levels: HARD / MEDIUM 1 SOFT 1 MIX
Full Control spray lance dirt grinder
For strong contaminations
Pressure level: HARD
Optional accessories
Plug 'n' Clean detergent bottle with locking lid
not included in the scope of delivery
Water supply hose
Special accessories
Assembly
See fold-out page 3 for illustrations
Mount loose parts delivered with appliance pri-
or to start-up.
Attach the net to the accessory compartmen
Illustration
Hook the net into the hooks shown in the illustrati-
Start up
park the appliance on an even surface.
Illustration
Pull the high-pressure hose completely through the
hose guide to the front.
Illustration
Push the high pressure hose into the trigger gun
until it locks audibly,
Note: Make sure the connection nipple is aligned
correctly.
Check the secure connection by pulling On the high
pressure hose.
Insert the mains plug into the socket.
The highest allowed net impedance at the electrical
connection point (refer to technical data) is not to be ex-
ceeded. In case of confusion regarding the power impe-
dance present on your connection, please contact your
utilities provider.
Water supply
For connection values, see type plate/technical data.
Impurities in the water can damage the high-pressure
pump and the accessories. For protection, the use of
the KARCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Water supply from mains
Observe regulations of water supplier.
A TTENTION
Hose couplings made Of metal with aquastop can da-
mage the pump! Please use plastic couplings or KAR-
CHER brass couplings.
Illustration
Screw the coupling element to the water connec-
tion on the appliance.
Attach the water supply hose to the coupling on the
water connection.
Connect the water supply hose to the water supply.
Completely open the water tap.
Special accessories expand the possibilities Of using
your appliance. Please contact your KÄRCHER dealer
for further information.
12
İlginizi çekebilecek Kärcher marka Yüksek Basınçlı Yıkama Makinesi ürünleri
