Kärcher K7 Compact Yüksek Basınçlı Yıkama Makinesi
Overflow valve with pressure switch The overflow valve prevents the permissi- ble working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the high pressure jet is stopped. If the lever is pulled the pump is turned on again. Description of the Appliance These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging). Illustrations on fold-out page! Storage for accessories 2 Transport handle, detachable 3 Quick coupling for high pressure hose 4 Appliance switch "O/OFF"/ „I/ON" 5 Mains cable with mains plug 6 Carrying handle 7 Bearing wheel 8 Water connection 9 Fine filter in the water connection Coupling element for water connection 10 11 Detergent suction hose (with sieve) 12 Trigger gun 13 Lock trigger gun 14 Key to detach the high pressure hose from the trigger gun 15 High pressure hose 16 Spray lance with pressure regulation (Vario Power) Carrying out the most common cleaning tasks. The work pressure can be stage- lessly regulated between "Min" and "Max". You can add detergent when "Mix" is selected. In order to adjust the working pressure, release the lever of the hand spray gun and turn the spray lance to the desired position. 17 Spray lance with Dirtblaster For strong contaminations * Optional accessories 18 Washing brush Suitable for use with detergents. 19 Delta-Racer DI 50 20 21 The Delta-Racer combines a wash brush with a rotating high pressure jet. Therefore, it is especially suited for ve- hicle cleaning or heavily soiled surfac- Foam nozzle with detergent container With powerful foam for effortless clean- ing. Not included in the delivery Water supply hose Use a fabric reinforced water hose with a commercially available coupling. Min- imum diameter 13 mm (1/2 inch); mini- mum length 7.5 m. Before Startup Attaching the Accessories Mount loose parts delivered with appliance prior to start-up. Illustrations on fold-out page! Illustration Screw the coupling element to the wa- ter connection on the appliance. Illustration Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. Water supply For connection values, see type plate/tech- nical data Caution Impurities in the water can damage the high-pressure pump and the accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. 4.730-059) is recommended. Water supply from mains Observe regulations of water supplier. Warning According to applicable regulations, the ap- pliance must never be used on the drinking water net without a system separator. A 17