Kärcher K5 Full Control Yüksek Basınçlı Yıkama Makinesi
Scope of delivery The scope of delivery of the device is illustrated on the packaging. Check the content for completeness upon unpacking In the event of missing accessories or any transport damage, please contact your dealer. Additionally required Fabric-reinforced water hose with commercially available coupling Minimum diameter, 1/2 inches (13 mm). Minimum length 7.5 m, Description of the Appliance These operating instructions describe the maximum equipment. Depending on the model, there are differ- ences in the scopes of delivery (see packaging). See fold-out page 4 for illustrations 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Coupling element for water connection Water connection with integrated sieve High pressure hose Hose guide Storage for spray lances Storage / parking position for trigger gun Connection for Plug Clean detergent Carrying handle Transport handle, detachable Hose switch High pressure connection Appliance switch "O/OFF"/ „I/ON" Mains cable with mains plug Accessory compartment Hooks for fastening the net Net for accessory compartment Bearing wheel Base with carrying handle Full Control trigger gun Battery compartment LED pressure indicator MIX/ 1 - SOFT 2 - MEDIUM / 3 - HARD Battery compartment lock Lock trigger gun Button for detaching the high-pressure hose from the trigger gun Full Control spray lance dirt grinder For strong contaminations Pressure level: HARD Full Control spray lance Vario Power Carrying out the most common cleaning tasks Pressure levels: HARD / MEDIUM 1 SOFT 1 MIX * Optional accessories Plug 'n' Clean detergent bottle with locking lid ** not included in the scope Of delivery Water supply hose Special accessories Assembly See fold-out page 3 for illustrations Mount loose parts delivered with appliance pri- or to start-up You will need the 2 included screws as well as a Philips screwdriver PH 2. Installing the base Illustration Insert base. Insert the included dowels all the way into the holes. Secure the base with the enclosed screws. Install storage for spray lances Illustration Hook in storage for spray lances. Secure the storage for the spray lances by means Of two screws. Install the transport handle Illustration Attach the transport handle. Secure the transport handle by means of two screws. Attach the net to the accessory compartment Illustration Hook the net into the hooks shown in the illustra- tion. Connect the high pressure hose to the trigger gun Illustration Push the high pressure hose into the trigger gun until it locks audibly Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. Special accessories expand the possibilities of using your appliance. Please contact your KÄRCHER dealer for further information. 12