Storage
CAUTION
Risk of personal injury or damage!
Consider the weight Of the appliance when storing it.
Storing the Appliance
Prior to extended storage periods, as during the winter,
also observe the instructions in the Care section.
park the machine on an even surface.
Push the casing Of the quick coupling for the high
pressure hose toward the rear and disconnect the
high pressure hose from the appliance.
Press the disconnect on the trigger gun and re-
move the high pressure hose from the trigger gun.
Insert the trigger gun in its holder.
Engage the spray lance in its compartment.
Stow away the mains cable, the high-pressure
1
hose and accessory on the appliance.
Frost protection
A TTENTION
Appliances and accessories that are not completely
drained can be destroyed by frost. Completely drain ap-
pliance and accessories and protect them against frost.
TO avoid damage:
A
Completely drain all water from the appliance:
Switch the appliance on with detached high pres-
sure hose and detached water supply (max _ 1 min-
ute) and wait, until no more water exits at the high
pressure connection. Turn off the appliance,
Store the appliance and the entire accessories in a
frost free room.
Care and maintenance
DANGER
Risk of electric shock.
prior to al/ work on the appliance, switch Off the ap-
pliance and pull the power plug.
Clean the sieve in the water connection
Clean the sieve in the water connection regularly.
Remove coupling from the water connection.
Illustration
A TTENTION
The sieve must not be damaged.
Pull the sieve out using flat pliers.
Clean the sieve under running water.
Reinsert the sieve into the water connection.
Cleaning the detergent filter
Prior to longer periods of storage, e.g. in the winter:
Remove filter from suction hose for detergent and
clean under running water.
Troubleshooting
You can rectify minor faults yourself with the help of the
following overview.
If in doubt, please consult the authorized customer ser-
vice.
DANGER
Risk Of electric shock.
Prior to al/ work on the appliance, switch off the ap-
pliance and pull the power plug.
Appliance is not running
Pull on the lever of the trigger gun; the device will
switch on.
Check whether the voltage indicated on the type
p ate corresponds to the voltage of the mains sup-
Check the mains connection cable for damages.
Pressure does not build up in the applian
Check setting at the spray lance.
Check water supply for adequate delivery rate.
pull Out the sieve in the water connection using flat-
nose pliers and clean under running water.
Appliance ventilation: Switch the appliance on with
the high-pressure hose detached and operate
(max. 2 minutes) until the water exits the high-pres-
sure connection without bubbles. Switch off appli-
ance and reconnect high-pressure hose.
Strong pressure fluctuations
Clean high-pressure nozzle: Remove dirt and de-
bris from the nozzle bore, using a needle and rinse
through with water from the front.
Check water flow quantity.
Appliance is leaking
Slight leakage from the appliance pump is normal.
If the leakage increases contact the authorized
customer service.
No detergent infeed
Use spray lance with pressure regulation (Vario
Power).
Turn the spray lance to "Mix" position.
Clean the detergent suction hose filter.
Check the detergent suction hose for kinks
Spare parts
Use only original KARCHER spare parts. You will find a
list of spare parts at the end of these operating instruc-
tions.
13
İlginizi çekebilecek Kärcher marka Yüksek Basınçlı Yıkama Makinesi ürünleri
