Kärcher K 7.300 Yüksek Basınçlı Yıkama Makinesi
damages. Pressure does not build up in the appliance Check setting at the spray lance. Appliance ventilation. Switch on the appliance without con- nection the high-pressure hose (max. 2 minutes) and run it until the water dis- charging from the high-pressure outlet is free of bubbles. Switch off appliance and reconnect high-pressure hose. Check the water supply. Pull out the sieve in the water connec- tion using flat-nose pliers and clean un- der running water. Appliance does not start, motor hums Cause: Voltage reduction due to weak mains supply or when using an extension cable. When switching on, first pull the lever of the trigger gun and then switch the ap- pliance switch to "I/ON". Strong pressure fluctuations Clean high-pressure nozzle: Remove dirt and debris from the nozzle bore, us- ing a needle and rinse through with wa- ter from the front. Check water flow quantity. Appliance is leaking Slight leakage from the appliance pump is normal. If the leakage increases con- tact the authorized customer service. No detergent infeed Use spray lance with pressure regula- tion (Vario Power). Turn the spray lance to "Mix" position. Check the settings at the dosage regu- lator for detergent. Check the detergent suction hose for kinks. 22 Appliance is not runnin Pull on the lever of the trigger gun; the device will switch on. Check whether the voltage indicated on the type plate corresponds to the volt- age of the mains supply. Check the mains connection cable for EN - 12 CE Declaration We hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. Product: High-pressure cleaner Type: 1.168-xxx Relevant EU Directives 2006/42/EC (+2009/127/EC) 2004/108/EC 2000/14/EC Applied harmonized standards EN 55014-1: 2006 + Al: 2009 EN 55014-2: 1997 + A2: 2008 EN 60335-1 EN 60335-2-79 EN 61000-3-2: 2006 + A2: 2009 EN 61000-3-3: 2008 EN 62233: 2008 Applied conformity evaluation rnethod 2000/14/EC: Appendix V Sound power level dB(A) Measured: 89 Guaranteed: 93 The undersigned act on behalf and under the power of attorney of the company man- agement. Jenner CEO S. Reiser Head of Approbation Authorised Documentation Representative S. Reiser Alfred Kärcher GmbH Co. KG Alfred-Kärcher-Str. 28 - 40 71364 Winnenden (Germany) Phone: +49 7195 14-0 Fax: +49 7195 14-2212 Winnenden, 2011/06/01