Kärcher K 7.300 Yüksek Basınçlı Yıkama Makinesi
Operation Scope of delivery The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking. In the event of missing accessories or any transport damage, please contact your Description of the Appliance These operating instructions describe the basic models of the high pressure cleaners shown on the front cover. These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging). Illustrations on fold-out pages! Coupling element for water connection 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 18 Water connection with integrated sieve Appliance switch "0/OFF"/ „I/ON" High pressure hose Dosage regulator for detergent Storage for trigger gun High-pressure hose drum Transport handle Hand crank for hose drum Storage of Plug 'n' Clean detergent bot- tle with detergent connection Storage for accessories Option Storage hook for mains connection ca- ble Option Automatic coiling for mains cable Mains cable with mains plug Plug 'n' Clean detergent bottle with locking lid Wheels Trigger gun Lock trigger gun Key to detach the high pressure hose from the trigger gun Washing brush 21 Spray lance with Dirtblaster 22 Spray lance with pressure regulation (Vario Power) Special accessories Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion. Before Startup Mount loose parts delivered with appliance prior to start-up. Install the storage for hand-spray gun Illustration Place the bottom holder into the recess- es and push forward until it audibly locks in. Illustration B Insert the top holder and push down all the way. Install the storage hook for the mains connection cable Option Illustration Install the top storage hook. Install the dosage regulator for detergent You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration @ Insert both detergent hoses onto the hose fittings. Install the dosage regulator and con- nect using 2 screws. Install the transport handle Illustration Wind up the high-pressure hose on the hose drum. Illustration Slide the free end of the coiled high pressure hose through the recesses on the dosage regulator. Illustration Attach the transport handle, insert the bolts into the bores and screw them in. Illustration Press the connecting fitting from the short high pressure hose into the brass intake until it locks into place audibly.