Hisar Hisar Neptün Düdüklü Tencere
PROBLEMS WATER IS DRIPPING AND STEAM IS EXITING AROUND THE LID VAPOR EXIT MUCH FROM PRESSURE REGULATING VALVE THE LID IS NOT OPENING CONTINUOUS STEAM EXITS FROM TOP OF THE LID AND ITS HANDLE PARTS. STEAM DOES NOT EXIT FROM PRESSURE REGULATING VALVE, ALTHOUGH STEAM EXITING FROM PRESSURE SAFETY SYSTEM STOPS. REASONS The lid is Closed properly, Silicone main seal is not installed correctly, it is dirty or damaged, Stage pressure adjust and safety do not work, It can be damage in the rims the pressure Stove is opened excesgOe'y or its pressure regulating is incorrect The lid due the pressure ccNer begin to boil While itg lid ig opened and intensive vapor exits. Heat input is not sufficient. The amount Of liquid in the pressure cooker is not enough. Stage Pressure Regulating Valve isin position. Silicon main seal is damaged, Stage Pressure Valve is blCCked 34 Regulating SOLUTIONS Carefully turning the lid its position. Clear the main seal and refit the right position. If damaged. replace "th original replacement seal. Perform cleaning and maintenance of safety after at the er•d of 2-3 cooking. Check th? rims Of the pressure CCOker to be clean and undamaged. Keeping pregsure uncter cold water and reduce itg preggure Check Stage Pressure Regulating Vatve, safety the main seal the lid. Please check pressure regulating position, Is it at the appropriate level? Reduce the heat of the stcwe the Stove, Wait for boiling to stop in the pressure cooker _ Yau Can the lid when boding stops. Increase the flame. nit at beast I Cup Water or liquid. Take the pressure position to I or 2. Replace With a seal. _ Turn off the heat input. Leave you' pressure Open the lid after it has cooled complete* and 100k at whether Stage Pressure Regulating Valve is blocked. Clean the Stage Pressure Regulating Valve and the pressure safety valve.