Fengchi FC125-36A DY125-36A Motorsiklet
TÜV Kraftfahrt GmbH TÜV Rheinland Group Accreditation: Technical Report No.: 85-2002/24-1005/06 RDW-99050014-02 TÜVR heinland Manufacturer : Guangzhou Dayang Motorcycle Co., Ltd. Type : DY125-36A 5. General requirements : The vehicle type fulfils the general requirements. 5.1. Following components of the same manufacturer can be interchanged. two-stroke engine : none four-stroke engine : none fer--meped : The change of onc, some or all parts did not causc increase of max. speed by more than 5%. for motorcycle : The change of one, some or all parts did not cause increase of max. engine power by more than 10%. 5.2. Manufacturer's declaration that the modification of ignition and/or fuel system does not increase fer--rneped : the max. vehicle spee~r-e-than-5-1~ attached to the information folder. for motorcycle : the max. engine power by more than 10% is attached to the information folder 2002/24-DY125- 36A-08. 5.3. ; 5.4. The vehicle is equipped with a restricted area in the inlet conduit / pipe / cylinder head. The design of this restricted area fulfils the requirements of the directive (only for motorcycle). 5.5. Specific requirements for categories A : The vehicle type fulfils the specific requirements. & B. Ali required vehicle parts are marked with a clear identification. 6. Location of Anti-tampering control : Right side behind steering shaft, refer to WVTA No. plate. e4*2002/24*0438*07 TÜV Kraftfahrt TÜV Kraftfahrt GmbH Technologiezentrum Verkehrssicherheit Page 21 TOV Rheinland Group Typprüfstelle Fahrzeuge/Fahrzeugteile Am Grauen Stein, D-51105 Köln (Poll)