Fakir SELENE 3 Saç Şekillendiricisi

ADDITIONAL IMPORTANT SAFEGUARDS:

1. Never block air intake grill, as this will cause the unit to overheat. Should this happen, a 
  built-in safety system will operate, and the unit will shut off automatically. At this point, 
  slide the speed switch to OFF position and wait a while before attempting to operate 
  appliance again. If the unit fails to operate after 10 minutes, it may indicate that the 
  appliance has sustained extensive internal damage.
2. Do not try to repair it yourself. Reder it to a qualified appliance repair technician.

3. This product has been designed to operate safely when held by the handle. When operating, 
  do not hold it by the power cord. Avoid contact with the hot attachment.

4. Never store hair styler or attachments while the hair styler is stil operating or when hot 
  from use. Unplug appliance from outlet and allow to cool before attampting to place 
  attachments into the case.

5. To extend the life of your air styler, it is advisable to switch it to LOW heat for a few seconds 
  before sliding the spped switch to the OFF position.

ELECTRIC POWER:

If the electric circuit is overloaded with other appliances, your appliance may not operate 
properly. It should be operated on a seperate electrical circuit from the other appliances.

HOW TO USE YOUR HAIR STYLER:

LOW / HIGH SETTING: For initial hiar drying and for most hair styling / setting procedures 
and hair types.

COOL (COLD SHUT): For finishing your hairstyler or for styling fragile, damaged, over- 
processed or permed hair.

USING THE ATTACHMENTS:

Choose the particular styling attachment you wish to style your hair with, depending on the 
effect you wish to achieve.

CAUTION: NEVER USE THE HOT AIR STYLER BODY WITHOUT FIRST PROPERLY 
ASSEMBLING UNIT WITH THE ATTACHMENT OF YOUR CHOICE.

REMOVING AND REPLACING ATTACHMENTS:

The air styler and attachment should be completely cooled: the speed switxh should be in 
the OFF position before removing or replacing attachments.

REPLACING STYLING ATTACHMENTS:

On the side of each attachment there are two notches and a flat notch on top. Align the flat 
top notch of the attachment with the top of the styler body and slide into place. You will hear 
a click when the attachment is secure. Pullup on the attachment to make sure it is securely 
attached.
                                           7