Fakir FAUST Elektrikli Süpürge
firmly.
Warning: The power cable can whip
around when being pulled in, it can
also trip you or somebody else up or
knock down objects.
3. Press the cable retract button (Fig.
14/2) to pull in the power cable. Guide
the last part with the plug by hand.
5. To vacuum, pull the cylinder vacuum 2
cleaner behind you like a sledge.
Observe the recommendations of the
flooring manufacturer.
NOTE:
You can quickly reduce the suction
1
power with the secondary air controller
(Fig. 13/1), e. g. to release curtains that
have been sucked in.
Fig. 14
For storage or during work breaks, you
can use the parking hook mount to
hook the parking hook onto the floor
nozzle (Fig. 15).
NOTE:
The cylinder vacuum cleaner has an
overheating protection device. It will
switch off automatically if overheated
(e. g. due to blocked nozzles or over-
full dust container). If this happens,
Fig. 15
then turn off the appliance and remove
the plug. Remove the cause of WARNING:
overheating. Wait approx. 45 min. You If you leave your work area, switch off
can use the cylinder vacuum cleaner the appliance.
again once it has cooled down. ATTENTION:
Switching off the unit and retracting Never position the appliance directly
the power cable against heat sources (e. g. heating,
1. Switch off the cylinder vacuum cleaner oven). Avoid direct sunlight. Heat can
using the on/off switch (Fig. 14/1) and damage the appliance.
pull the plug out of the socket. If you want to store the appliance for a
2.Take the plug in your hand and hold it longer period of time, empty the dust
18