3. When required, push the desired nozzle ATTENTION:
onto the lower end of the telescopic Only use the cylinder vacuum cleaner
tube or the handle (Fig. 9). if all filters are correctly in place and
once you have ensured that no
openings are blocked The filters must
be intact and dry. Non-compliance can
damage the cylinder vacuum cleaner.
1. Push on the desired nozzle
2. Remove the cable, by holding the plug,
until the yellow mark is reached.
ATTENTION: Warning: If the red mark is visible, use
If you use the cylinder vacuum cleaner the cable retract button (Fig. 11/1) to
without an attached nozzle, there is a draw in the cable again up to the yellow
greater risk of accidently vacuuming mark. Otherwise the cable can break
up objects. off. There is a risk of electric shock.
4. As illustrated, secure the nozzles no 3. Switch on the cylinder vacuum cleaner
longer required onto the accessories using the on/off switch (Fig. 11/2).
mount, as far as this is possible. 2
•Push the 2-in-1 combi-nozzle into the
accessories mount (Fig. 10/a).
•Push the crevice nozzle onto the
accessories mount and attach it so it
clicks audibly and noticeably into 1
place(Fig. 10/b).
5. Keep the other nozzles safe and Fig. 11
inaccessible to children(Fig 10/b).
4. Adjust the carpet/hard floor switch (Fig.
12) depending on the type of flooring:
• Hard floor (Fig. 12/A) Laminate
flooring, tiles, PVC flooring, etc.
• Carpet (Fig. 12/B) Long and short pile
carpets, runners, etc.
Operating the Unit
WARNING:
Check the cylinder vacuum cleaner
and the power cable before each use.
A damaged appliance must never be
used.
17
İlginizi çekebilecek Fakir marka Elektrikli Süpürge ürünleri