Fakir E 240 Elektrikli Süpürge
• pressing the cord re-wind button (1) pull out the brush (press the switch on the
the cord out of the casing and insert the nozzle-brush with a drawing ). You can find
plug into power socket. nozzles for furniture, gaps and upholstery
in accessories compartment (9) located
• Start the vacuum cleaner up pressing the inside the vacuum cleaner. You can fit them
On-Off button (1) in extension tube inlet or hose inlet. Open
the compartment lid and take out a nozzle
SUCTION POWER REGULATION or a brush.
You can adjust the suction power to suit
the type of flor being cleaned. Use the
symbols on the suction power display as a
guideline.
Vacuuming delicate material and rough
objects:
Small brush is used for vacuuming: libraries,
picture frames and windows. We
recommend reducing suction power during
• Curtains, textiles ( lowest setting) such activity.
• Upholstery, cushions
• High-class carpets, rugs and runners
slightly soiled carpets and hard floors
• Heavily soiled carpets and hard floors with
coarse dirt (highest setting)
To set the desired power setting, pres the
+ button (2) or the – button (1) several timesVacuuming gaps, corners, cavities, etc.:
until the desired setting lights up on the Gap nozzle is used for vacuuming: gaps,
suction power display. corners, spaces and other recesses with
difficult access.
Accessories
Soft surface cleaning – carpets and floor You can place each of a/m brushes or
coverings: we recommend you to use nozzles inside the hose handle. In such
nozzle-brush for carpets. Fit the nozzle- case it is „handy always ready for use.
brush with the tube and switch it to carpet
clearing function: with hidden brush (press Dustbag Replacing
the switch on the nozzle-brush according Dust bag replacing is necessary when you
to the drawing). notice that:
1. Filter indicator is red,
2. Suction is significantly lower,
3. Dust bag is full.
Hard surface cleaning – wooden floor, PVC
floor, ceramic tiles, etc.: we recommend
you to use nozzle-brush for such floor. Stick
10
