Fakir C220 Elektrikli Süpürge
Connecting the telescopic vacuum Using your vacuum cleaner
tube Pull the power cord. Plug the pins into
After the vacuum hose is connected, the socket. Press the power button on
connect the telescopic tube to the end the vacuum cleaner. You can start
of the vacuum hose. vacuuming now. The suction power of
the vacuum cleaner can be adjusted
NOTE: Only one end of the telescopic according to the suction power adjust
tube is suitable for vacuum hose. key on the appliance.
The other end is for swiveling floor
nozzle. WARNING: A YELLOW mark on the
power cable shows the ideal cable
After the telescopic vacuum tube is length. Do not extend the cable
connected, the height of the tube can beyond the RED mark.
be adjusted by pushing the button and
pulling the tube vertically. After Use
To carry the vacuum cleaner, you can
Connecting the swiveling floor nozzle use the ergonomic carry-handle.
Connect the swiveling floor nozzle to
the end of the telescopic vacuum tube. Storage
Swiveling floor nozzle is a multi-purpose Switch the appliance off and remove
nozzle, which can be used both for the mains plug from the wall socket.
hard floors and carpets. Rewind the mains cord by pressing the
cord rewind button. In order to rewind
Using for hard floors: the cord correctly, guide the cord with
Press the button on swiveling floor one hand when you press the cord
nozzle with your foot to let the brush rewind button. Keep doing this until all
inside the nozzle come out. With this the cord is rewinded.
setting, the nozzle can be used to After cord rewind, lift the vacuum
vacuum the hard floors. cleaner up and attach the tube to the
base to take the appliance to park
Using for carpets: position.
The brush of the nozzle will disappear
by pressing the button on swiveling Maintenance and Cleaning
floor nozzle with your foot again. With
this setting, the nozzle can be used to Changing the dustbag
vacuum the carpets. The dustbag needs to be replaced
according to your use frequency.
Connecting the accessories
The accessories of the vacuum cleaner To change the dustbag,
can be used by connecting them to 1. Turn off the appliance and unplug from
the vacuum hose. the mains.