Fakir C220 Elektrikli Süpürge
2. Open the front cover. HEPA Filter
3. Remove the dustbag holder and HEPA filter filters the exhaust air.
remove the full dustbag. According to your use frequency the
4. Insert the new dustbag into the dustbag HEPA filter should be changed in 6
holder. months to 1 year.
5. Insert the dustbag holder into the
lowerhousing. To change the HEPA filter,
6. Close the lid ('ticktack') 1. Turn off the appliance and unplug from
7. Note that it is impossible to close the the mains.
cover when no dustbag has been 2. Dismantle the grill between the On/Off
inserted. switch and cord rewind by pressing
the release button.
In the box of the appliance, there are 3. Take the old HEPA filter out.
3 Microbag dustbags. You can use 4. Place the new HEPA filter in its place.
them according to your need. For extra 5. Place the grill to its place and push it
need, please contact with authorized until you hear the click sound.
Fakir Service.
Cleaning
Changing the Filters
The housing, cord and the plug of the
In-Let filter vacuum cleaner has to be cleaned with
The in-let filter needs to be replaced a very soft damped cloth. Never use
according to your use frequency. chemicals on the appliance.
To change the in-let filter, If you experience insufficient suction
power,
1. Turn off the appliance and unplug from
the mains. Please check:
2. Open the front cover. • If the dustbag is full?
3. Lift up the filter behind the dustbag. • If the nozzle, tub or hose is blocked?
4. Slide the new filter down its place. To remove the obstruction, let the air
5. Close the front cover. flow through the hose and/or tube in
opposite direction.