Bosch DHU665CTR Davlumbaz
1.10 If the room where the cooker hood is to be used contains a fuel burning appli- ance such as a central heating boiler then this must be of the room sealed or balanced flue type. If other types of flue or appliance are fitted, ensure that there is an adequate supply Of air into the room. When the cooker hood is used in conjuc- tion with appliances supplied with energy Other than electric, the negative pressure in the room must not exceed mbar to prevent fumes being drawn back into the room by the cooker hood. 1.11 The apliance must be positioned so that the plug is accessible. 1.12 If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 2. INSTALLATION INSTRUCTIONS Some installation systems require the opening and removal Of the metal grille panel. 2.1 Instructions for opening and removing the metal grille panel TO open the grille panel, press inwardly on the two slider catches at each side of the grille panel and the grille will pivot down. To remove the metal grille, pull forward on the right hand side so that the hinge pin on the back of the grille will be released from the slot in the side of the casing. 2.2 Wall cabinet fixing a- Predrilled wall cabinet: fix the hood onto the wall cabinet base panel using the four screws 4.2x45 mm (supplied with the fixing kit) Its is not necessary to open the metal grille. b- No predrilled wall cabinet: b. 1- If the hood is provided with a paper filx- ing template, follow the instructions. b.2- If the hood is not provided with a paper fixing template, position the hood on the wall cabinet base panel and pilot drill the 3.5x16 mm screws (not sup- plied with the fixing kit) from the inside onto the wood.