Taral 5014 MG ATOMİZÖR İlaçlama Makinası

11-Do not touch the muffler. Since the temperature around the muffler is above 80°C, there is a danger of hurting
Yourself. Parts.
12-During the operation if you hit any item with the device, stop the engine and
do not operate before repair.
To avoid fire;
   Do not fill the fuel tank above the fuel level sign.
 - To prevent pouring of fuel onto the engine and frame, use the measuring cup 
   as well as the funnel.
 - While filling the tank with funnel do not smoke and keep flammable materials away. 
 - De not operate the device in areas with explosive materials.
 - De not overturn the machine during servicing, when there is fuel in the fuel tank.
 - Do not fili the fuel tank while the engine is operating.
 - Do not pull out the fuel hose while the engine is operating or while it is hot.
 - Do not stad up the engine without the ignition plug.
13-Do not omit any of the parts on the air blower.
14-Keep the product out of the direct sunlight to protect it against the influences of the ultraviolet radiation.
15-Empty the fuel tank after every use.
16-Pull out the ignition plug after finishing the operation.
17-Wash yourself after each operation with clean water.
18-For a safety operation, always use original spare parts.
19-Do not operate the machine without the pleated hose.
20- 
21- 
22- 
23- 
24- 
25- 


2- SIVI ILAÇ KULLANIMI İÇIN ALETİN MONTAJI
Boğumlu hortum (3) dirseğe (4) geçirin.Kelepçe l'i (11) takıp sıkın.Püskürtme borusunu (5) boğumlu hortuma 
geçirerek kelepçe-2'yi 12) sıkın.İlaç hortumu-l'i (10) musluğun (9) girişine takm.ilaç hortumu 2 (8) ile musluğun 
çıkışını ve debi ayar musluğunu (7) birleştirin.Depo kapağını açarak hortum bağlantılarının (Şeki1:3) teki gibi olup 
olmadığını kontrol edin.

2- ASSAMBLIES FOR LIQUID APPLICATIONS
Connect flexible hose (3) to elbow (4) of the machine and tighten the clamp-1 (11). Connect Spray tube (5) to flexible 
hose and tighten clamp-2 (12). Connect chemical hose-1 (10) to inlet side of on-off tap (9) and also chemical hose-2 
(8) to outlet side of on-off tap (7) and dosage sleeve. Check if hose connections are the same as shown on fig. 3 via 
opening chemical tank lid.



                                                                        1 -Depo/Store
                                                                        2-Motor/Engine
                                                                        3-Boğumlu Hortum/Connect flexible
                                                                         hose
                                                                        4-Dirsek/Elbow
                                                                        5-Piiskürtme Borusu
                                                                        6-Püskürtnıe Başlığı
                                                                        7-Debi Ayar Musluğu/
                                                                        8-İlaç Hortumu 2/Chemical hose 1
                                                                        9-MuslukiTap
                                                                        10-İlaç Hortunuı I/Chen-ılıca] hose 2
                                                                        11-Kelepçe I/Clamp 1
                                                                        12-Kelepçe 2/Clamp 2
                                                                        3-Kahza/Handle
                                                                        14-Gaz Kolu/Gas
                                                                        15-Toz Kolu/



                                                    (5)