Her biçme diskinde her biri yay baskılı üçer adet bıçak vardır.Bıçakların her iki
tarafı da kesme özelliğine sahiptir.Diskler birbirlerine ters döndüklerinden,bir diskte
aşınan bıçakların bir yüzeyi diğer diskte kullanılabilir.Kesici bıçaklar özel bir anahtarla
disk sökülmeden basit bir şekilde yerinden çıkartılıp değiştirilebilir.
Tamburlu Çayır Biçme makinasının çalışma emniyeti ,bu tip makinelarda
kullanılan yay baskılı emniyet düzeni ile sağlanmıştır.Ayrıca traktör kuyruk milinden
mafsallı mil ile hareketin iletildiği makinanın ana milinde yay emniyet kavraması
mevcuttur.
05- MAIN INFORMATIONS FOR MACHINE
It is connected with a three pointed hanging system to tractor and 11 is
specified as pulleyed. rotary cuttered, free cutting possibility and manufactured by
SÜRÜM Tarım Mak. San.
There are three pointed hanging system, gear box, V belt-pulley system, two of
cutter pulley, 6 of leaf cuter, jointed axle to move carrying bars connected to three
pointed hanging system and carrying chassis on the pull eyed Mower.
The machine is designed as two different chassis. Both three pointed hanging
system and belt-pulley system form the first chassis of the machine. The gear box is the
second chassis which bear the pulleys at the same time. The gear box and first chassis
are connected to each other with two piece of slider bearing by the side of machine. The
pulley activate to gear is formed by bearing. Furthermore two of chassis’s are connected
to three pointed hanging system with two of parallel steel bar which has spring pressed
and this causes to adjust the length of machine.
The rotary mower is activated from upper side of machine. The first movement
is transmitted from tractor back pivot axle to three grooved V belt-pulley system, then it
is transmitted to gear box and pulley axle through gears and last of all movement is
transmitted to cutter disks. At the first step , movement is transferred with belt-pulley
system and at the second step it is transferred to gear boxthen to cutter disks.
FİN up the gear box with suitable oil. Oil leakage is obtained with a joint There
are double of gear which increase the ~ movement comes from pulley and two of
double gear which transfer the movement to cutter disks in the gear box. There are total
three-double gear in the gear box.
9
İlginizi çekebilecek Sürüm marka Çayır Biçme Makinesi ürünleri
