Philips HP6511 Epilasyon Cihazı
ENGLISH 13 2 Press the release button (1) and pull the epilating head off the appliance (2) (Fig. 9). 3 Hold the appliance in your hand and insert a screwdriver into the opening in the bottom of the epilator (1).Then move the screwdriver upwards (2) to open the housing (Fig. 16). 4 Pull the two housing halves apart with your thumbs until the snap connections break (Fig. 17). 5 Remove all components (motor unit and the printed circuit board unit) from the housing halves. 6 Insert a screwdriver between the plastic battery holder and the batteries (Fig. 18). 7 Remove the batteries from the plastic battery holder and the printed circuit board (Fig. 19). Do not try to reassemble the appliance in order to run it from the mains. This is dangerous (Fig. 2). Guarantee & service If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.