Microm STP120 Doku Takip Cihazı (Tıbbi Amaçlı)
STP 120 Should any instrument failure occur, the microprocessor Alarms displays an alarm message on the screen and the pilot light of the ALARM key begins flashing. There are two types of alarm: ■ Kullanıcı tarafından susturulabilir alarmlar ■ Yetkili servis tarafından susturulabilir alarmlar Kullanıcı tarafından susturulabilir alarmlar: Alarm Cause Solution EOAIA IIAPA~~IN The unit is attempting a vertical movement over a Wait until the paraffin has melted. paraffin bath where the paraffin has not melted IIOS2EP ~AIAYPE The power supply to the unit has failed and Determine whether the whole process therefore the basket may have been at one should be repeated station for longer than programmed and finalisation of the program may be delayed IIPOBE ~AIAYPE The unit has lost contact with the probe that Make sure that the paraffin bath is 10 1112 measures the temperature of the indicated connected to the correct connector. Refer station. to 'connecting paraffin baths' XHANI'E ~IATEP The working life of the filter has expired Refer to 'Changing the filter'. EAMIIAEE OYT An attempt is being made to program a delayed Place the carrousel in the start position start with the carrousel not lowered. (basket submerged in reagent vessel 1) In Take Sample the time limit for the samples out Lower the carrousel to submerge the of the liquid has been exceeded basket in the reagent vessel. XHEXK BATTEP'P Low battery level has been detected on starting Make sure that the battery is connected the unit and that the fuse has not blown. Alarmı susturmak için ALARM tuşuna basın, eğer ekrandan silinmiyor ise yetkili servis çağırın. Yetkili servis tarafından susturulabilir alarmlar HOLDER LOWERED HOLDER IN CENTRE HOLDER RAISED VERTICAL FAILURE HORIZONTAL FAILURE HORIZONTAL MOTOR ON REGULATOR FAILURE HOLDER OUT OF RANGE UNIT FAILURE 387716 - Türkçe - 40