Microlife BP 3BTO-2 OTOMATİK KOLDAN ÖLÇEN TANSİYON ALETİ Tansiyon Aleti

ERR 5         The measured readings indicated an unacceptable difference between systolic and diastolic
              pressures. Take another reading following directions carefully. Contact you doctor if you 
              continue to get unusual readings.
HI            The pressure in the cuff is too high (over 300 mmHg) or the pulse is too high (over 200 beats
              per minute). Relax for 5 minutes and repeat the measurement.*
LO            The pulse is too low (less than 40 beats per minute). Repeat the measurement.*
* Please consult your doctor, if this or any other problem occurs repeatedly.
Other possible malfunctions and possible solutions – If problems occur when using the device, the 
following points should be checked and if necessary, the corresponding measures are to be taken:
Malfunction                                      Remedy
The display remains empty when the               1. Check the polarity of the batteries (+/-)
instrument is switched. Batteries have           2. If the display is erratic or unusual, remove the batteries 
been installed.                                     and re-install new batteries.
The pressure does not rise although the          •  Check the connection of the cuff tube and connect 
pump is running.                                    properly if necessary.
The instrument frequently fails to measure       1. Ensure the cuff fits correctly.
the blood pressure values, or the values         2. Make sure that the cuff is not fitted too tightly. Ensure 
measured are too low (too high).                    tight clothing such as a a rolled-up sleeve isn’t exerting 
                                                    pressure on the arm above the measuring position. Take 
                                                    off articles of clothing if necessary.
                                                 3. Measure blood pressure again in complete peace and quiet.
Every measurement produce different value        •Please read the following information and the points 
although the instrument functions normally          listed under «Common sources of error». Repeat the 
and the values displayed are normal.                measurement.
Blood pressure values measured differ from       •  Record the daily development of the values and consult 
those measured by the doctor.                       your doctor.
☞ Further information
The level of blood pressure is subject to fluctuations even in healthy people. It is important to compare 
measurements taken under the same conditions and at the same time of day. (Quiet conditions)! 
If you have any questions regarding the use of this blood pressure monitor, please ask your dealer or 
pharmacist for the Microlife Service representative in your country. The Microlife Service Team will be 
happy to help you. Never attempt to repair the instrument yourself!
Any unauthorized opening of the instrument invalidates all guarantee claims!


7. Care and Maintenance, Recalibration

a) Do not expose the device to either extreme 
     temperatures, humidity, dust or direct sunlight.

b) The cuff contains a sensitive air-tight bubble. Handle 
     the cuff carefully and avoid all types of straining 
     through twisting or buckling.
                                                                                                             9