Kumtel KS 2580 INFRARED Elektrikli Isıtıcı Soba
Wall Mounting (Picture 2)
Your device has wall mounting aparatus with self in gift box. Please check it. Remove the 4 screw from the connection cover and release it by pushing
it upwards. Now tilt the heater downwards. Remembering to observe minimum distances, mark the positions of the holes into which dowels are to be inserted
from middle to middle: advice dimension for it please see table and picture.
MODEL KS 2590 KS 2595 KS 2600 KS 2605 KS 2610
Wall mounting distance (L)460-560 mm 460-560 mm 460-560 mm 460-560 mm 560-660 mm
Back side of the device has 2 metal wall mounting part by montaged on it. These parts must have fixed by 2 screw with metal head. And again you will
find to 2 more metal fixing part in the gift box. These paris must have fixed together with other metal fixing parts by screw and nut with wing also.
Atter the dowels have been inserted, attach the heater. But in this time heater must be excatly horizontal.
After assembly you can arrange te heater which position is suitable for you. Pos ition it to find the best angle and tighten the pivot screws.
Instruction for Use
Possibly it should be on and off the appbance you must turn(max or mm n position) the
thermostat knob. Please careful that it has been installed and used in correct plac,es for
make use of your device with optimal level
It you do not use your device for long time or when you move it to another place, please
be sure it must be plug out and cooled down.
Customer Assistance:
These heater contain no customer serviceable paris other than assembly paris. Therefore
please contact your dealer or retailer in the event it is defective or you wish to have it
repaired subject to the terms of the warranty.
Pictures 2
5
