Kärcher K5 Compact Yüksek Basınçlı Yıkama Makinesi
Before Startup Attaching the Accessories Mount loose parts delivered with appliance prior to start-up. Illustrations on fold-out page! Illustration Screw the coupling element to the wa- ter connection on the appliance. Illustration Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. Water supply For connection values, see type plate/tech- nical data. Caution Impurities in the water can damage the high-pressure pump and the accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. 4.730-059) is recommended. Water supply from mains Observe regulations of water supplier. Warning According to applicable regulations, the ap- pliance must never be used on the drinking water net without a system separator. A suitable system separator by KÄRCHER or alternatively a system separator according to EN 12729 type BA must be used. Water that has flown through a system sep- arator is no longer classified as drinking water. Caution Always connect the system separator to the water supply, never directly to the appli- ance! 18 Drawing in water from open reservoire This high-pressure cleaner is suited to work with the KÄRCHER suction hose with back- flow valve (Optional accessory, order no. 4.440-238) to draw in surface water, e.g. from water butts or ponds (see specifica- tions for max. suction height). Fill the suction hose with water. Screw the suction hose into the water connection of the appliance and insert it into the water source (e.g. rainwater drum). Start up Caution Dry running of more than 2 minutes leads to damage of the high-pressure pump. If the appliance does not build up pressure within 2 minutes, switch the appliance off and pro- ceed in accordance with the instructions in Chapter "Troubleshooting" Illustration Push the high pressure hose into the quick coupling until it locks audibly. Attach the water supply hose to the coupling on the water connection. Note: The supply hose is not included. Connect the water supply hose to the water supply. Completely open the water tap. Insert the mains plug into the socket. Turn on the appliance "I/ON". Illustration Unlock the lever on the trigger gun. Pull on the lever of the trigger gun; the device will switch on. Switch the appliance on for a (max. of 2 minutes) and wait until the water exits at the hand spray gun without bubbles. Release the lever on the trigger gun. Note: Release the lever of the trigger gun; the device will switch off again. High pressure remains in the system. Illustration Lock the lever on the trigger gun.