Description of the Appliance
These operating instructions describe the maximum
equipment. Depending on the model, there are differ-
ences in the scopes Of delivery (see packaging).
See fold-out page 3 for illustrations
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
High pressure connection
Appliance switch "O/OFF'/ „I/ON"
Storage hook for high pressure hose and mains
connection cable
Transport handle
Storage for spray lance
Storage for trigger gun
Water connection with integrated sieve
Detergent suction hose (with sieve)
Coupling element for water connection
Bearing wheel
Mains cable with mains plug
Trigger gun
Lock trigger gun
Clamp for high pressure hose
High pressure hose
Spray lance with Dirtblaster
For strong contaminations
Spray lance with high pressure nozzle
For normal cleaning tasks.
Optional accessories
Washing brush
Rotary washing brush
Especially suitable for cleaning cars.
Foam nozzle with detergent container
With powerful foam for effortless cleaning.
** not included in the scope Of delivery
Water supply hose
Special accessories
Special accessories expand the possibilities of using
your appliance. Please contact your KÄRCHER dealer
for further information.
Assembly
Mount loose parts delivered with appliance prior to start-
up.
See fold-out page 4 for illustrations
Illustration
Insert the transport wheels and lock them.
Illustration
Attach the transport handle.
Illustration
Screw the coupling element to the water connec-
lion on the appliance.
Illustration
pull out the clamp for the high pressure hose from
the hand spray gun.
Illustration
Connect high pressure hose to trigger gun.
Push the clamp in until it locks. Check the secure
connection by pulling on the high-pressure hose.
Start up
Park the appliance on an even surface.
Illustration
Connect the high pressure hose to the high pres-
sure connection of the appliance.
Water supply from mains
For connection values, see type plate/technical data.
Observe regulations of water supplier.
A TTENTION
Impurities in the water can damage the high-pressure
pump and the accessories. For protection, the use of
the K,ÄRCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Illustration
Attach the water supply hose to the coupling on the
water connection.
Connect the water supply hose to the water supply.
Completely open the water tap.
Operation
CAUTION
Dry running of more than 2 minutes leads to damage of
the high-pressure pump. If the appliance does not build
up pressure within 2 minutes, switch the applance Off
and proceed in accordance with the instructions in
Chapter "Troubleshooting"
High pressure operation
CAUTION
Keep a distance Of at least 30 cm when using the jet for
cleaning painted surfaces to avoid damage.
ATTENTION
Car tyres, paint or sensitive surfaces such as wood
should not be cleaned with the dirt blaster, as there is a
risk of damage.
Illustration
Push the spray lance into the trigger gun and fasten
it by turning it through 900.
Insert the mains plug into the socket.
Turn on the appliance "I/ON"
Unlock the lever on the trigger gun.
pul on the lever Of the trigger gun; the device will
switch on.
Note: Release the lever of the trigger gun; the de-
vice will switch Off again. High pressure remains in
the system.
Operation with washing brush
A TTENTION
Risk of damage to the paintwork
When working with the washing brush, it must be free Of
dirt or other particles.
Push the washing brush into the trigger gun and
fasten it by a 90' turn.
Note: If required, the washing brushes can be used to
work with detergent.
Operation with detergent
Note: Detergent can only be added when the device is
operated in low pressure mode.
A DANGER
When using detergents, the material data safety sheet
issued by the detergent manufacturer must be adhered
to, especially the instructions regarding personal pro-
tective equipment.
11
İlginizi çekebilecek Kärcher marka Yüksek Basınçlı Yıkama Makinesi ürünleri
