Kärcher K 7.350 MD Yüksek Basınçlı Yıkama Makinesi
Operation Scope of delivery I The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking. In the event of missing accessories or any transport damage, please contact your Description of the Appliance These operating instructions describe the basic models of the high pressure cleaners shown on the front cover. These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging). Illustrations on fold-out pages! 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Coupling element for water connection High pressure connection Water connection with integrated sieve Appliance switch "O/OFF"/ „I/ON" Dosage regulator for detergent Storage for trigger gun Transport handle Detergent reservoir with locking lid Storage of detergent reservoir with de- tergent connection Storage for accessories Storage hook for mains connection ca- ble Mains cable with mains plug Wheels Trigger gun Lock trigger gun Key to detach the high-pressure hose from the trigger gun Washing brush Spray lance with Dirtblaster Spray lance with pressure regulation (Vario Power) High pressure hose Special accessories Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion. Before Startup Mount loose parts delivered with appliance prior to start-up. Install the storage for hand-spray gun Illustration Place the bottom holder into the recess- es and push forward until it audibly Icoks in. Illustration B Insert the top holder and push down all the way. Install the storage hook for the mains connection cable Option Illustration Install the bottom storage hook. Illustration Install the top storage hook. Install the dosage regulator for deter- gent You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration Insert both detergent hoses onto the hose fittings. Install the dosage regulator and con- nect using 2 screws. Install the transport handle Option Illustration Attach the transport handle, insert the bolts into the bores and screw them in. 19