Kärcher K 5.600 Yüksek Basınçlı Yıkama Makinesi
Illustrations on fold-out page! 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Coupling element for water connection High pressure hose Quick coupling for high pressure hose Water connection with integrated sieve Appliance switch "O/OFF"/ „I/ON" Dosage regulator for detergent Storage for trigger gun Transport handle, detachable Storage for high-pressure hose Storage of Plug 'n' Clean detergent bot- tle with detergent connection Storage for accessories Storage hook for mains connection cable* Plug 'n' Clean detergent bottle with locking lid Mains cable with mains plug Wheels Trigger gun Lock trigger gun Key to detach the high pressure hose from the trigger gun Spray lance with pressure regulation (Vario Power) Spray lance with Dirtblaster Washing brush* Rotary washing brush* Delta-Racer DI 50* * depending on model Special accessories Special accessories expand the possibilities of using your appliance. Please contact your KÄRCHER dealer for further information. Before Startup Mount loose parts delivered with appliance prior to start-up. Install wheels Illustration Push the wheels into the intake and se- cure with the enclosed plugs, watch for positioning of plug. Install the storage for hand-spray gun Illustration Place the bottom holder into the recesses and push forward until it audibly locks in. Insert the top holder and push down all the way. Install the storage hook for the mains connection cable Illustration Press in the storage hook and lock it into the top position. Install the transport handle Illustration [J Place the transport handle into the in- take until you feel resistance. Use the heel of your hand or a soft rubber mallet to position it. Install the dosage regulator for detergent You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration Insert both detergent hoses onto the hose fittings. Install the dosage regulator and con- nect using 2 screws. Note: During installation you must make sure that the tongues of the dos- age regulator match up with the intend- ed recesses in the casing. Connect the high pressure hose to the hand spray gun Illustration Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. 17