Kärcher K 4.650 M T250 Yüksek Basınçlı Yıkama Makinesi
The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking. In the event of missing accessories or any transport damage, please contact your Description of the Appliance Illustrations on Page 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Coupling element for water connection High pressure hose Quick coupling for high pressure hose Water connection with integrated sieve Appliance switch "O/OFF"/ „I/ON" Dosage regulator for detergent Storage for trigger gun Storage of detergent reservoir with de- tergent connection Transport handle Storage for high-pressure hose Storage hook for mains connection ca- ble Storage for accessories Detergent reservoir with locking lid Wheels Trigger gun Lock trigger gun Key to detach the high-pressure hose from the trigger gun Spray lance with pressure regulation (Vario Power) Spray lance with Dirtblaster Special accessories Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion. Operation Scope of delivery EN-4 Before Startup Mount loose parts delivered with appliance prior to start-up. Install wheels Illustration Push the wheels into the intake and se- cure with the enclosed plugs, watch for positioning of plug. Install the storage for hand-spray gun Illustration Place the bottom holder into the recess- es and push forward until it audibly locks in. Insert the top holder and push down all the way. Install the transport handle You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration Slide the transport handle into the guide and secure it with 2 screws. Install the dosage regulator for detergent You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration Insert both detergent hoses onto the hose fittings. Install the dosage regulator and con- nect using 2 screws. Note: During installation you must make sure that the tongues of the dos- age regulator match up with the intend- ed recesses in the casing. Connect the high pressure hose to the hand spray gun Illustration Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. 15