Inter AC-01 Uzaktan Kumanda

AUTO CODE SEARCH :




1.Press and release the function key which 


    you want to set first .


3.Press and hold [SET] key for 3 seconds, 


    it will show SETUP and flash twice. 


4.Then it will show PRE-CODE. You can use 


    the CH+ or CH- key to select AUTO, PS MODE or RESET. You 


    press and release the [SET] key to select the AUTO setup menu. 


5.The code number of the Device will be flashing on the LCD. 


6.Press and release the CH+/-, it will start the auto searching. 


7.If you press and release the CH+/ - again, it will change the 


    searching direction.


8.after searching the corrected code ,your target AC will make


      BEEP sound ,then you can press [SET] key to save the CODE . 


    It will show OK on the LCD and EXIT the setup mode.







                TEMP                            TEMP                            TEMP                            TEMP
                23                              23                              23                              23
          SETUP                           PRE-CODE                        AUTO                            PS MODE
        AM  12:47                         AM 12:47                        AM12:47                         AM12:47

























                                                 TEMP                           TEMP
                  23                             23                             23                                 23
            RESET                          AUTO                           AIR   CON 1                       AIR CON 1
            AM12:47                        AM
                                             12:47                            400                             390
























                TEMP                             TEMP                             TEMP23
                  23                            23
            AIR CON 1                      OK                               EXIT 
              395                            395                                395





















    Note :


    1.If no key on your remote is pressed over 30 seconds, the 

        programming process will stop automatically, and you will have 

        to start over.


    2.If LCD don't flash on the setting mode, it stands for exit the 

        setting mode.




                                                                 13