Fakir KASTELL Elektrikli Süpürge
Warning: The power cable can whip
around when being pulled in, it can
also trip you or somebody else up or
knock down objects.
3. Press the cable retract button (Fig.
14/2) to pull in the power cable. Guide
the last part with the plug by hand.
5. To vacuum, pull the cylinder vacuum
cleaner behind you like a sledge.
Observe the recommendations of the
flooring manufacturer.
NOTE:
You can quickly reduce the suction
power with the secondary air controller
(Fig. 13/1), e. g. to release curtains that
have been sucked in.
For storage or during work breaks, you
can use the parking hook mount to
hook the parking hook onto the floor
nozzle (Fig. 15).
NOTE:
The cylinder vacuum cleaner has an
overheating protection device. It will
switch off automatically if overheated
(e. g. due to blocked nozzles or over-
full dust container). If this happens,
then turn off the appliance and remove
the plug. Remove the cause of
overheating. Wait approx. 45 min. You WARNING:
can use the cylinder vacuum cleaner If you leave your work area, switch off
again once it has cooled down. the appliance.
Switching off the unit and retracting ATTENTION:
the power cable Never position the appliance directly
1. Switch off the cylinder vacuum cleaner against heat sources (e. g. heating,
using the on/off switch (Fig. 14/1) and oven). Avoid direct sunlight. Heat can
pull the plug out of the socket. damage the appliance.
2.Take the plug in your hand and hold it If you want to store the appliance for a
firmly. longer period of time, empty the dust
18