Fakir KAISER Elektrikli Süpürge
the filter according to the indications when it fits to its place. Close the bottom lid and place the container in its place on the vacuum cleaner. Release the dust container handle and push it until you hear a “click” sound. When you hear click, it means the dust container is fitted to its place and you Cord Rewind can start vacuuming again. Button • Maintenance of Exhaust Filter The exhaust filter should also be cleaned regularly for vacuum cleaner’s efficient work. For this, unlock the back grill by any problem. If the power cable can not pressing the back grill lock. Uninstall the be rewinded completely, please pull out exhaust filter with its cage. Wash it with only the power cable a little bit and press the water and dry it completely. After the filter rewinder button again. You can repeat the is dried completely place it in its cage. To rewinding place the cage to its place, first put the nails down and then put the upside. Place 4. MAINTENANCE AND CLEANING the back grille by first putting the nails on upside and pressing the lock on grille. • Maintenance of Dust Container Filter When grille is in its place release the lock. The filter inside the dust container should be cleaned regularly for vacuum cleaner’s efficient work. Before closing the bottom lid of the dust container, when you unload the dust from the container, unlock the cage around the filter according to the indications at the bottom of the filter. Then rotate the cage counterclockwise and unlock it. Clean the filter with the brush supplied. Put the cage on the filter and rotate it clockwise to lock it. Place the filter in the dust container so, that the parts in the container would fit inside of the filter. Rotate • Cleaning of Vacuum Cleaner The housing, cord and the plug of the vacuum cleaner has to be cleaned with a very soft damped cloth. Never use chemicals on the appliance. 10