Fakir G-MAX Elektrikli Süpürge
cannot be removed, insert a new 5. Remove the H.E.P.A. filter (Fig. 4/4)
protective motor filter
6. Insert the dry protective motor filter
back into its holder.
7. Place protective motor filter into its
receptacle.
8. Replace the filter cover by hooking it
precisely from above first .Then engage Fig. 4/4
the lock by pressing it until it audibly
clicks into place. 6. Clean the H.E.P.A. filter or if it is very
dirty replace it with a new one.
NOTE: 7. Place the clean/new H.E.P.A. filter
The filter cover must be inserted back into its receptacle. Then insert
correctly for the dust container to fit the H.E.P.A. filter cover by hooking it
into its mounting bracket. Pressing in from above first. Lock the cover by
firmly will not help if the cover has not pressing firmly until it audibly and
been positioned precisely. noticeably clicks into place.
9. Place the dust container onto the NOTE:
cylinder vacuum cleaner. Press the Please wash the H.E.P.A. filter only
dust container firmly into its mounting one time. Replace the H.E.P.A. filter
bracket until it audibly clicks into place.at latest every 6 months.
10. Check whether the dust container is
securely seated. NOTE:
It may be necessary to push a bit
NOTE: harder. Make sure when doing this that
It may be necessary to push a bit the cover clicks fully into place behind
harder. To make it easier, you can hold both projections provided for this
the release button pressed when purpose. Otherwise the cover and
inserting the dust container. possibly even the exhaust filter will fall
out easily.
Replacing the H.E.P.A. filter
1. Switch the appliance off with on/off
switch.
2. Remove every accessorie of the
appliance.
3. Reverse the appliance.
4. Release the H.E.P.A. filter cover on
the recessed handle provided for this
purpose and remove it.
18