Fakir EMOTİON 2400 Elektrikli Süpürge
Replacing or cleaning the dust bag
While the dust bag full indicator turns red,
it indicates out that the dust bag is full, and
need to be cleaned or replaced.
a. Confirm the power supply is disconnected.
b. Lift the locking knob of the front cover, and
open the front cover.
locking knob
of the front
cover
Replacing or cleaning filters
a. Confirm the power supply is disconnected.
b. For replacing an air inlet filter, open the
front cover, take out the air inlet filter rack,
replace the dirty filter with a clean one, then
put the filter rack and the filter back, close
dust bag the front cover.
bag rack
Filter
c. Slowly draw the dust bag out from the bag Air inlet filter
rack
rack, don’t spill the dust out.
d. If a paper bag is used, replace it with a
new one.
c. For replacing the air outlet filter, open the
air outlet plate, take the dirty air outlet filter
out and replace it with a new one, close
the air outlet plate.
e. Dust bag installation: Push the dust bag
toward at the direction of the arrow till it
reach the bottom of the bag rack, then
close the front cover for use.
12
