Fakir Elektrikli Süpürge EMOTİON 2200 1. sayfa 1 Fakir Elektrikli Süpürge EMOTİON 2200 2. sayfa 2 Fakir Elektrikli Süpürge EMOTİON 2200 3. sayfa 3 Fakir Elektrikli Süpürge EMOTİON 2200 4. sayfa 4 Fakir Elektrikli Süpürge EMOTİON 2200 5. sayfa 5 Fakir Elektrikli Süpürge EMOTİON 2200 6. sayfa 6 Fakir Elektrikli Süpürge EMOTİON 2200 7. sayfa 7 Fakir Elektrikli Süpürge EMOTİON 2200 8. sayfa 8 Fakir Elektrikli Süpürge EMOTİON 2200 9. sayfa 9 Fakir Elektrikli Süpürge EMOTİON 2200 10. sayfa 10 Fakir Elektrikli Süpürge EMOTİON 2200 11. sayfa 11 Fakir Elektrikli Süpürge EMOTİON 2200 12. sayfa 12 Fakir Elektrikli Süpürge EMOTİON 2200 13. sayfa 13 Fakir Elektrikli Süpürge EMOTİON 2200 14. sayfa 14 Fakir Elektrikli Süpürge EMOTİON 2200 15. sayfa 15 Fakir Elektrikli Süpürge EMOTİON 2200 16. sayfa 16 Fakir Elektrikli Süpürge EMOTİON 2200 17. sayfa 17 Fakir Elektrikli Süpürge EMOTİON 2200 18. sayfa 18


Fakir EMOTİON 2200 Elektrikli Süpürge

       locking knob of the                                               Machine Storage and Maintenance
       air outlet plate 
                                                                     a. Please confirm the power supply is 

                                                                         disconnected and the power cord is 

                                                                         rewinded up.

                                                                     b. Put the floor brush’s fixing clasp into the 

                                                                         hook at the middle part of the vacuum 

                                                                         cleaner.






    air outlet plate                                                               Fixing clasp of the 
                                                                                   floor brush


    Air outlet filter





                                                                                                                         back cover 
                                                                                                                         hook










d. For washing the filters, please wash them 

    in clean water, vibrate the filters to eliminate 

    excessive water, then put them at a shady 

    or cool place for air-drying. Please assemble 

    them to the vacuum cleaner for using after 

    they are completely dry, otherwise the motor 

    will be damaged.

    IMPORTANT NOTICE: Must be washed 

    at an interval of half year at least.

    Trouble Shooting 

    Problems                             Causes                                         Solutions
                                                                                        Check the socket to confirm 
                                         The power supply isn’t connected in.           whether the power is available.

                                                                                        Confirm whether the power 
                                                                                        supply plug is firmly connected.

                                         The thermostat is assembled in                 Pull out the plug and close the power 
    The machine can’t be started.        the vacuum cleaner to protect the              supply switch, take out and empty the 
                                         motor. And the thermostat will cut             dust bag or replacing the dust bag, at 
                                         off the currency when the circuit              the same time, set the vacuum cleaner 
                                         runs abnormally.                               disuse to cool down it for about 1 hour. 
                                                                                        Then put in the plug, connect the power 
                                                                                        switch,and restart the vacuum cleaner.

                                         Position of the sliding control button         Check whether the sliding control button 
                                                                                        is at the Maximum.

                                         Position of the sliding button on the handle   Check whether the sliding button on the 
    Insufficient suction force.                                                         handle is completely turned off.

                                         The dust bag full indicator turn red shows     Replace or clean the dust bag; take out 
                                         that the dust bag is full, or the floor brush, the impurities in the floor brush, long 
                                         telescopic tube or the hose is blocked         connection pipe or hose.

                                         The air inlet or outlet filter is full of dust Clean or replace the air inlet/outlet filters

                                         The power cord is slightly twisted             Pull out part of the power cord and press 
    The power cord can’t be                                                             down the rewinding button to rewind the 
    completely pulled out or rewinded.                                                  cord back completely.


           12