3. Switch on the cylinder vacuum cleaner 2.Take the plug in your hand and hold it
using the on/off switch firmly.
ffi Warning: The power cable can whip
around when being pulled in, it can
also trip you or somebody else up or
knock down objects.
4. To vacuum, pull the cylinder vacuum 3. Press the cable retract button to pull
cleaner behind you like a sledge. in the power cable. Guide the last part
Observe the recommendations of the with the plug by hand.
flooring manufacturer.
5. You can reduce the suction power with
the power regulation.
For storage or during work breaks, you
~ can use the parking hook mount to
hook the parking hook onto the floor
nozzle.
NOTE: ,
The cylinder vacuum cleaner has an
overheating protection device. It will
switch off automatically if overheated
(e. g. due to blocked nozzles or over- iı
full dust container). If this happens,
then turn off the appliance and remove WARNING:
the plug. Remove the cause of If you leave your work area, switch off
overheating. Wait approx. 45 min. You the appliance.
can use the cylinder vacuum cleaner ATTENTION:
again once it has cooled down. Never position the appliance directly
against heat sources (e. g. heating,
Switching off the unit and retracting oven). Avoid direct sunlight. Heat can
the power cable damage the appliance.
1. Switch off the cylinder vacuum cleaner If you want to store the appliance for a
using the on/off switch and pull the longer period of time, empty the dust
plug out of the socket. container and clean it as well as the
filters. Store the appliance in a cool,
dry room, inaccessible to children.
Emptying the dust container
ATTENTION: Before you empty the
ii
İlginizi çekebilecek Fakir marka Elektrikli Süpürge ürünleri
