Fakir A 200 Elektrikli Süpürge

Accessories                                  Automatic cable rewind
                                             After use, unplug and press the cable 
Insert the flexible hose                     rewind button to retract the cable.
Fit the hose to the cleaner by inserting the 
hose end into the hose inlet until it clicks WARNING: When using the cable rewind, 
to the position.                             always hold the plug as the cable will rewind 
                                             quickly.
To remove the flexible hose 
When removing, squeeze the clips both        Replacing or cleaning the dust bag 
side and pull.                               While the dust bag full indicator turns red, 
                                             it indicates out that the dust bag is full, and 
Fitting the tubes and accessories            need to be cleaned or replaced.
Attach the tube to the handle end of the 
hose. The hose handle features an airflow a. Confirm the power supply is disconnected.
regulator which allows suction to be      b. Lift the locking knob of the front cover, and 
reduced as required.                         open the front cover.
Attach the floor brush to the tube.       c. Slowly draw the dust bag out from the bag 
Attach the multi purpose nozzle to the tube. rack, don’t spill the dust out.(Picture 2)
Turn the rotating nozzle as the arrowhead 
show; it can be used as the upholstery 
nozzle (for curtains and upholstery).                                  2
Turn the rotating nozzle backwards to the 
home position; it can be used as the crevice 
nozzle (for awkward places, behind radiator; 
or for hard surfaces, pelmets, delicate 
objects etc).
                                          d. Replace the dust bag with a new one. 
Controls                                     (Picture 3)

Power                                               3
The on/off control is operated by On/off 
switch-button.


Variable power
A Variable power switch 3 varies the suction 
power as required. For example, maximum      Replacing or cleaning HEPA filter
suction can be used for cleaning carpets, a. Confirm the power supply is disconnected.
hard floors etc, and reduced suction for  b. For replacing HEPA filter, open the front 
cleaning upholstery and curtains.            cover, (Picture 4) take out the Hepa filter, 
Suction can also be controlled using the     replace the dirty filter with a clean one, then 
airflow regulator on the handle. Closed for  put the filter rack and the filter back, close 
maximum suction, open for reduced            the front cover.
suction.                                  c. For washing the filter, please wash them in 
                                             clean water, vibrate the filters to eliminate

                                                                            9