INSTRUCHOM
Before using the product. pfease read the
ins-tructions carefufly.
Appropriately keep it for Ister use when
rechn kal parameters necessary.
Matters need attentIon
When using thıs product, you shourd abide by
Adapter specificati on Input: AC 220V-240V/50Hz basic safety measures constantly,
which include:
Output: DC 12V • Before connecting this product to the source,
please check to make sure if current voltage
accords with that marked in the charger.
• Only the charger and charge plug saat
Battery variety 9.6V Ni-Cad battery provided by this product can be used.
• This product should be placed where chıldren
Vacuum degree . SkPa can't reach.
• The voltage on the contact bar of charge plug
saat is fow-voftage, so it's safe.
Noise = 76dB • Before chargi ng, kum off the power supply
of the product.
Charging interval 12 hours ~Mtv
Don't re move, ma ınta in or ref it the product,
unless t s done by authorized engineer.
Maximum working time 20 rninutes It will cause fire, leakage or hurt ıf error
restructuri ng or rnairitain the device.
Body: 380 x 112 x 145mrrı Don't insert the dub into the ventifator
Product outline dirrıension or air vent of the motor. Otherwise -the motor
Charge plug sea' and accessory: 20 x 190 x 465rnm
will be darnaged.
Product weight About 2.9 kg Don't absorbcombustible rnatter,corrosive liquor
or uncooled dinker. Dtherwise fire fl be caused.
11
Don't use this product to absorb glass Arotke:
or acufeated metal otherwise the product wilf • PI ease do n't charge or I ocate this product in
be damaged. the environment with temperature fess
than O degree or higher than 40 degree;
Don't dip the cleaner or charge unit in ~ter, • It is norrnaf for AC adapter (car's cigarlighter)
and don't let water in electric device. In order or cleaner to catch a ıittle fever;
to prevent leakage. • If the cleaner isn't connected to the charger,
charge can't be done;
Don't bleck the air vent when absorbing dust. • Charge time is about 10 to 12 hours.
otherwise the su rface will be def-ormed or burst
into flame because of overheat. Operating methods
Clean Rotation sucking Icit:
Notice: Please turn off the power supply vvhen Clean the haır hard floor and carpetanci thrum
charging or finishecl using on cluthes, beddıng, sof a and carpet
Sucking tube for gapsz
Working Cfean coner, furniture s I its and the corners vvhere
PIJM thriş swtch and the LED lamd wil I tum is difficult to çkar),
bright.
Natio»
Charging indirated lamp Make sure that the position is correct in order
When charg inç, the indıcated 'anıp will turn to prevent the direct light. Don't put
bright. it near the stove or other calorific apparatus and
Source indicated lamp (red) prevent the efectric elements from
Charging indıcated I amp (green) wetting.
When using it, lf huge paper. spitball, plastic
How to charge roembrane or other sunclries bigger
The first one: Insert one DC plug of the adapter -than the core diame-ter of pipette are founci on
into the DC socket of host machine or the DC the floor need cleaning, sweep them
socket of charge plug test, then connect first so that not to blodc the air vent and affect
the power supply and you can charge now. -the use of the cleaner.
Stumps with fıre ara not allowed to be absorbed
in order not to burn the flIter
14
İlginizi çekebilecek Blue House marka Elektrikli Süpürgeler ürünleri