Blue House BH016K Elektrikli Süpürge
Wet Dry With Blowing Function VACUUM and trunk are inside the (main body. After DRY CLEANING AND ACCESSORIES
Thank you for buying Vacuum Cleaner which is getting off your vacuum cleaner from gitf box, " Preparing to use: Open the locks both side of
manufactured with the most recent technology please (open the side locks and take out the the body and pull from the handle to remove
in our modern factory. motor part. Take out all the (accessories inside the upper part.
You vacuum cleaner has made checked by all the main body and fit the engine part to its
quality controls before offering to sales. place and (close the side locks.
• Gently fit the hose to vacuuming hole and turn
• The motor with the by-pass system is specially right to be locked. Put (the pipe at hose. You
designed according (to international standards can also use only one pipe or you can use
and will not be effected by the fluctuations without (pipe and the accessories directly on
(of current voltage. hose, [as seen on pictures]
• By-pass system allows the engine to cool down
with a separate (ventilator which avoids the To Operate The Vacuum Cleaner
engine to burn out although vacuum (system Please take into consideration that your operating
is closed by anyway. voltage is suitable for your vacuum cleaner. Plug • Place paper bag (if you want, only dry
• Vacuumed dusty air is filtered, cleaned and the cable on a wall electric circuit and turn the vacuuming] then cloth bag. You can use
flown away without touching (the engine. This switch to "I" position. without paper bag, only with cloth bag.
will avoid collection of dust on the engine and
allows (the engine to operate long life. Manual Vacuum Control
• With it's variable filter system, it will not flow Becasue of high vacuum power, while vacuuming
the dust on the engine (and allows the engine light materials like silk carpet, curtain, fabric, etc.,
to operate long life. may be sucked inside the vacuum hole. You can
• Rustproof, unperforated body is resistant to open the vacuum control manually to reduce the
strikes. vacuum power to desired level.
• Radio, TV interference.
• Both wet&dry cleaning. BLOWING FUNCTION
• With blowing function. You can clean the edges, corners, curtains, leaves • Place upper part on the body and lock both
by placing the hose to blowing hole [B]. locking pawls.
HOW TO USE
• Your vacuum cleaner has different accessories
for variable vacuuming. (Please take care for
choosing the accessory according to type of
(vacuuming. Ali the accessories except the pipe
8
• Place hose to the vacuuming hole. CLEANING Cleaning The Main Body
Emptying tha body and cleaning filters Float will close the sucking hole and stop • Do not use for hot materials, acids, explosives,
You do not need to clean your vacuum cleaner vacuuming when liquid increase the capacity level solvent, abrasives (cleaning
very often as it has a very large dust capacity. If while liquid vacuuming. You have to dispose the • Do not pull the cable while it is plugged
the sucking power is reduced this means the body liquid to continue cleaning. • Pis. urgently unplug your product if:
is full on the filterl has got dirty. You have to - The product works with any interruption (-
empty the body or clean the filter. You can wash Warning: Dust bag has to be used on all cleaning - After using
your filter with warm water if you want. Warning! except liquid vacuuming. If the float will go up - Before settling accessories
Do not forget to unplug your product before and stop vacuuming at liquid vacuuming although - Before cleaning
cleaning. it has not filled, pis. stop your vacuum leaner and
wait a while. The water on the float will pour • If the cable is damaged, pis. unplug your
• Combine the pipes and hose, and requested Float Filter down and the float will go down to its normal product and go to an (authorized technical
accessories. You have to clean the float filter when it gets position. service.
dirty. Take ofFthe float filter and wash it with Ifyourvacuum cleaner will turn over while liquid • Dnly use original accesories
warm water and place it into its place after drying. cleaning, the float will close the sucking hole and • Original spare parts have to be used for
stop vacuuming. Get your product to upright repairing
Cleaning Wet Surfaces position and wait for the float to go down to • All repairing have to be done by authorized
Primarily the dust bags and all the accessories of start vacuuming. aftersale services, (otherwise it will be
dry cleaning have not to be used while cleaning dangerous and the responsibility will be on
wet surfaces. Pis, use rectangle vacuum accessory SAFETY USAGE RULES the (owner's side.
for cleaning ceramics, marbles etc. Pis. read the safety usage rules below carefully:
• Your vacuum cleaner is manufactured
Cleaning Of Tha Engine Sucking Filter according to technical (and safety standards.
Then open the switch Cleaning of the engine sucking filter periodically • Always use your products at the same voltage
will increase the sucking power and lifetime of shown on (instruction manual and product
the engine. itself.
Gently pull the sponge filter and remove it. Wash • You can use legthening cable if you are sure
the filter with the detergent. Before placing the that it is safe.
sponge do not forget to rinse it. • Check all the filters and do not use
Warning: Do NOT attempt to work the vacuum without filters.
cleaner when the filter is removed. • Keep away your product from children.
• Do not keep the vacuuming pipe close to ears
and eyes
9 10